|   | 
          
            
  
  
  
   
 
 Next: Mixer Unit
 Up: Control Board
 Previous: Output Assign Module
     Contents 
 
 
A single transport control module is present in the prototype control
board.  Figure 77 shows the silkscreen/assembly layer
for the transport control PCB.  Table 4 lists the bill
of materials for this board.  Figures 78 and
79 show the top and bottom routing layers, respectively.
Figure 77:
Transport control module PCB, silkscreen/assembly drawing.
  |  
 
 
 
Table 4:
Transport control module, bill of materials.
	 
| REFDES | 
QTY | 
DESCRIPTION | 
 
| S1 - S7 | 
7 | 
E-Switch momentary PCB-mount pushbutton | 
 
| R1 - R3, R11 | 
3 | 
300 ohm 1/8W | 
 
| R4 - R10 | 
7 | 
2.2K ohm 1/8W | 
 
| R1 - R13 | 
13 | 
0.1uF monolithic | 
 
| D1 - D3 | 
3 | 
dual 7-segment green LED display | 
 
| D4 - D6 | 
3 | 
T1-3/4 green LED | 
 
| U1 | 
1 | 
GAL16V8 | 
 
| U2 - U7 | 
6 | 
74LS373 | 
 
| U8 - U13 | 
6 | 
74LS247 | 
 
 
 |  
 
 
 
Figure 78:
Transport control module PCB, component-side routing.
  |  
 
 
Figure 79:
Transport control module PCB, solder-side routing.
  |  
 
 
 
  
  
  
   
 
 Next: Mixer Unit
 Up: Control Board
 Previous: Output Assign Module
     Contents 
Steve Richardson
2000-07-06
 | 
Table of Contents
 
 
[Whole document in PDF 1.9MB]
 
 
[more photos and information]
 
 |